1500W Servo Motor Driver

Product Detail

1500W servo motor


Characterstic :
1?Supply voltage is single phase or three  phase AC170-253V .
2?Medium power (1 - 3Kw) motor driver , MAX  output current is 20A .>
3?With three control mode : location . Speed  and torque .
4?Speed/torque control order is the simulation  signal of ±10V .
5?Provide encoder output reponse pulse .
6?With the analysis and protect function  of over-current .over-voltage .abnormal or worse encoder .
7?Applied widely  in packing machine .embroidery Machine and  cnc machine etc

Parameters  :

Basic    spec	Output    power	01.0~    3.0 KW
	Output    current	20    A
	Input    power supply	Single    phase or three phase AC170-253V
		50/60HZ
	Colling    type	Natual    cooling
	Control    type	SVPWM vector control
	Encoder	Incremental    encoder 1500PPR/5000PPR/8192PP
Inner    Function	Display    and operation	Six    class seven-segement display LED : four operation key
	Control    mode	Location    control /simmulation voltage speed control /speed trying-work/jog operation
	Braking    function	Inner
	Protect    function	over-current .over-voltage . abnormal or bad location
Location    control mode	Instruction    control mode	Outer    pulse

 

Location    control mode	Instruction    control mode
	Outrt    order  input pulse	form	Pulse    + direction  dual pulse
		Max    frequency	Outer    pulse
	Electric    gear ratio		1    ~ 32767/1~32767
	Instuction    smooth method		Smooth    time constant 0~2 sec




Speed    control mode	Outer    simulation voltage	Voltage    range	±10V
		Input    impedance	10K
	Speed    control range		Speed    gear ratio :1:5000
	Speed    rate of change		<    ±0.03 (loading    0~100%)  < ±0.05 (power supply -155 ~ +10%)
	Instruction    smooth type		Straight    line constant 1ms ~ 10000ms(or/min--1000r/min )
	Frenquency    characterstic		300HZ
	Limit    of torque		Inner    pararmeter setting




Input/output    signal	Input    location signal	Output    type	ABZ    phase wore output /Z phase output open collector
		Frequency    division ratio	1/255/    ~ 1
	Input    signal	4    clock input photoelectric isolation	1.servo    enable; 2.alarm is clear ;3.deviation counter reset; 4.instruction pulse    prohibited/speed select 2
	Output    signal	4    clock open collectoros	1.enable    is ready for output ; 2.output servo alarm ; 3.output Z signal ;4.output    brake




Using    environment	temperature	Work    :0?~55? Storage :-20?~80?
	huminity	Smaller    than 90% (no condensation)
	size	200×152×76mm

Driver current 10-25mA , limit the  condition outer current max voltage 24V ,make sure the value of resistance
Experience data : V=24v , R=1.3-2K ;  VCC=12V ,R = 510-820O .
Installation :